http://www.jameskoopmann.com/docs/Install_Oracle11gCentOS5.htm
Introduction
This paper takes a look at installing Oracle 11g (11.1) on Linux (CentOS-5).You can read about CentOS at www.centos.org and be assured of its' Enterprise-class quality. This paper will use Oracle's Quick Installation Guide for Linux x86 as its' guide—noting where additional information may be obtained but getting Oracle installed on Linux as fast as possible. We at thecheapdba.com have years of experience installing Oracle—starting back with Oracle 7. We will point out best practices so that you end up with a reliable database that provides exceptional performance. We will occasionally re-visit, edit, and post additions to this paper as we find further configuration best practices.
This paper will not cover the installation of CentOS-5 as that can be acquired through the CentOS website and additional Linux guides. We will however point out those alterations to the Linux environment that pertains to getting Oracle installed.
Our goal is to provide you with the steps to properly install the Oracle 11g software without having to read Oracle's installation guide from front to back cover. We will provide you the commands to execute (just cut-n-paste) and the desired outcome of those commands. If you get something other than what is expected it would be time for you to re-visit earlier steps in this process. So hold on, here we go.
It is assumed that the installer of Oracle software has access and is running on an X Window System workstation. Please consult X Server documentation if you need help. We at thecheapdba.com typically will use cygwin ( www.cygwin.com ) for all interfacing with our Linux distribution. It has an X Window System that works quite well—and as we always like is free.
Checking Hardware RequirementsLog into the CentOS-5 system as the root user.For setting up the system to be used by Oracle there are a few prerequisites that must be checked and possibly changed by the root user. Log in as the root user and this document will tell you when it is time to switch from the root user to someone else.How much memorycommand: grep -i memtotal /proc/meminforesults: should be at least 1GB How much swapcommand: grep -i swaptotal /proc/meminforesults: should be 1.5 the size of memtotal if memtotal < 2GB should be equal to memtotal if memtotal is between 2GB and 8GB should be .75 the size of memtotal if memtotal > 8GB What processor typecommand: grep "model name" /proc/cpuinforesults: informationalHow much available RAM and swapcommand: freeresults: informational How much shared memory availablecommand: df -k /dev/shmresults: informationalpurpose: The shared memory should be sized to be at least the greater of MEMORY_MAX_TARGET and MEMORY_TARGET for each Oracle instance on the computer. How much disk space in /tmpcommand: df -k /tmpresults: should have at least 400MB available How much disk space for Oracle binariescommand: df -kresults: Depending on installation type you should have between 1.5GB and 3.5GB Checking Software RequirementsWhat distribution and version of Linux is installedcommand: cat /proc/versionresults: Linux version 2.6.18-8.1.15.el5 (mockbuild@builder6.centos.org) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Mon Oct 22 08:32:04 EDT 2007 What version of the kernel is installedcommand: uname -rresults: 2.6.18-8.1.15.el5 Are the following packages installed (assumes CentOS-5 and above distribution)command:rpm -q binutils \ compat-libstdc++ \ elfutils-libelf \ elfutils-libelf-devel \ glibc \ glibc-common \ glibc-devel \ glibc-headers \ gcc \ gcc-c++ \ libaio-devel \ libaio \ libgcc \ libstdc++ \ libstdc++ \ make \ sysstat \ unixODBC \ unixODBC-develresults: you will probably get quite a few packages that are not installed with a typical installation. You can investigate missing packages with the following command making sure you add/subtract from this list if necessary. yum list available "compat*" \ "elfutils*" \ "glibc*" \ "gcc*" \ "libaio*" \ "sysstat*" \ "unixODBC*"action : Our base installation left us needing to issue the following command to install missing packages. yum -y install compat-libstdc++-296.i386 \ compat-libstdc++-33.i386 \ elfutils-libelf-devel.i386 \ glibc-devel.i386 \ glibc-headers.i386 \ gcc.i386 \ gcc-c++.i386 \ libaio-devel.i386 \ sysstat.i386 \ unixODBC.i386 \ unixODBC-devel.i386 Create Oracle user and groupCreate groups oinstall & dbacommand: /usr/sbin/groupadd oinstall /usr/sbin/groupadd dba Create the Oracle and change passwordcommand: /usr/sbin/useradd -g oinstall -G dba -s /bin/bash oracle /usr/bin/passwd oracle Validate the nobody user existscommand: /usr/bin/id nobodyresults: this user is almost always created on a base CentOS installation action : if this user is not created use the following command to create /usr/sbin/useradd nobody Configuring kernel parametersThe following kernel parameters must be validated and possibly changed. Use the commands given below to view a particular kernel setting and then change if the setting is lower than the recommendation given in the following table. You can make the changes by editing the /etc/sysctl.conf file and then rebooting the server. The following results are what we observed on our server and should not be expected on yours.
|
shmmni |
4096 |
| shmall |
2097152 |
| shmmax |
2147483648 |
| semmsl |
250 |
| semmns |
32000 |
| semopm |
100 |
| semmni |
128 |
| file-max |
65536 |
| ip_local_port_range |
1024 - 65000 |
| rmem_default |
1048576 |
| rmem_max |
1048576 |
| wmem_default |
262144 |
| wmem_max |
262144 |
command: /sbin/sysctl -a | grep kernel.semresults: kernel.sem = 250 32000 100 128 command: /sbin/sysctl -a | grep kernel.shmresults: kernel.shmmni = 4096 kernel.shmall = 268435456 kernel.shmmax = 4294967295 command: /sbin/sysctl -a | grep file-maxresults: fs.file-max = 102440 command: /sbin/sysctl -a | grep ip_local_port_rangeresults: net.ipv4.ip_local_port_range = 32768 61000 command: /sbin/sysctl -a | grep rmem_defaultresults: net.core.rmem_default = 109568 command: /sbin/sysctl -a | grep rmem_maxresults: net.core.rmem_max = 131071 command: /sbin/sysctl -a | grep wmem_defaultresults: net.core.wmem_default = 109568 command: /sbin/sysctl -a | grep wmem_maxresults: net.core.wmem_max = 131071 sample /etc/sysctl.conf file. This is given as an example only and does not reflect the results obtained above by the /sbin/sysctl commands. Only add lines that are needed and do not change any values to be lower than the base installation might have assigned. kernel.shmall = 2097152kernel.shmmax = 2147483648kernel.shmmni = 4096kernel.sem = 250 32000 100 128fs.file-max = 65536net.ipv4.ip_local_port_range = 1024 65000net.core.rmem_default = 4194304net.core.rmem_max = 4194304net.core.wmem_default = 262144net.core.wmem_max = 262144 Setting shell limits for the Oracle userAdd the following lines to /etc/security/limits.conforacle soft nproc 2047oracle hard nproc 16384oracle soft nofile 1024oracle hard nofile 65536 Add the following lines to /etc/pam.d/loginsession required /lib/security/pam_limits.sosession required pam_limits.so Add the following lines to /etc/profileif [ $USER = "oracle" ]; then if [ $SHELL = "/bin/ksh" ]; then ulimit -p 16384 ulimit -n 65536 else ulimit -u 16384 -n 65536 fifi Creating Directories to Install the Oracle SoftwareValidate you have enough space on disk and choose a directory to install command: df -kresults: pick a mount point that has enough space—we have chosen /opt for the our. Create subdirectories and give permissions to the oracle userThe following directory used is common for Oracle installations. Note that we are creating all directories under /opt and that there are no other applications using /opt/app and below. This is very important as we are changing permissions with the following commands.command: mkdir -p /opt/app/oracle/product/11.1.0 chown -R oracle:oinstall /opt/app chmod -R 775 /opt/app Switch to the oracle userUp to know we have been doing everything as the root user. It is now time to switch to the oracle user to actually install the Oracle software.command: su – oracleAdd the following line to $HOME/.bash_profileumask 022 Execute oracle's bash_profile to use new settingcommand: . ./.bash_profile Make sure the oracle user is using an X Windows System It is assumed you know how to set up an X Windows System as stated earlier in the document. Please verify it is working by issuing the xterm command and validating an X Terminal comes up. You may close the X Terminal if you wish. Set Oracle environment for the installationIssue the following commands to set/unset particular Oracle environments in preparation for the installation.command: export ORACLE_BASE=/opt/app/oracle export ORACLE_SID=orcl unset ORACLE_HOME unset TNS_ADMINStart Oracle InstallerThis paper assumes you have downloaded the Oracle software from the net and have unzipped the files. We have unzipped our software into /opt and the following commands will take you through starting the Oracle installer form that mount point.command: cd /opt/database ./runInstallerFrom this point, Oracle will do a few minor checks on the operating system and then put up the Oracle Installation screen. Our particular configuration did not throw any errors at this point but it should be noted, as it can be helpful, that sometimes the Oracle installer will complain at this very early stage about various Linux system configurations. If this is the case you might be able to bypass them by adding an additional argument to the runInstaller command. Please only use this as a last resort to the normal installation path.command: ./runInstaller -ignoreSysPrereqs From this point on we will walk through each of the prompts one at a time to give you a simple feel for a full installation of the Oracle software. Select installation method This screen is very busy to say the least. We are not going to create any databases at this point as it is not required nor is it suggested to do at this point. We like to create databases separately through the Database Creation Assistant (DBCA) and not confuse the software installation process. 1. Choose basic installation1. verify Oracle Base of '/opt/app/oracle'2. verify Oracle Home of '/opt/app/oracle/product/11.1.0/db_1'3. verify installation type of 'Enterprise Edition'4. verify dba group of 'dba'2. Un-check “Create Starter Database”3. Un-check “Advanced Installation”4. Click <NEXT> Specify Inventory directory and credentials1. verify path of inventory directory of '/opt/app/oraInventory'2. verify group name for install of 'oinstall'3. Click <NEXT> Product-Specific Prerequisite ChecksThis screen, the installer will verify the system environment and report on any issues it may find. If all goes well you will get the status of 'Succeeded' for every check. Scroll through and make sure nothing has failed or look at the status box at the bottom of the screen and verify you get the following:'Check complete. The overall result of this check is: Passed'1. verify all statuses2. Click <NEXT> SummaryThis screen give a summary of the installation you are about to perform. It can be interesting to click and expand the products being installed to give you an idea of the what product and version is going to be installed.1. validate 'Global Settings' for directories2. validate 'Space Requirements'3. Click <NEXT> Install This screen gives a status of what is being installed. If all system settings have been properly set and all packages been installed properly then this should proceed without error. The status bar gives some indication of what is being installed at a particular point and the amount of work to be performed. But as all status bars you never really know how long in the process it is. 1. Note the time it takes for specific products. If you notice one hanging or taking a long amount of time (greater than 10 minutes) you could have a condition that requires a pre-installation patch. Don't stop the installer yet but instead start looking for a bug / patch for the Oracle 11g installation process and the actual product being installed.2. Execute Configuration scripts1. open up a different terminal window2. login as the root user3. run /opt/app/oraInventory/orainstRoot.sh4. run /opt/app/oracle/product/11.1.0/db_1/root.sh1. accept default of /usr/local/bin5. Click <OK>3. Click <EXIT>4. Click <YES> Cleanup1. If you downloaded the software from the net you can now remove .zip file and the complete directory structure you unzipped it to. That particular command is not given here as it can be quite disastrous if executed from the wrong directory. 2. Add the following lines to oracle's $HOME/.bash_profile file. This will allow you to execute various Oracle binaries to create databases, configure network settings, and generally manage the Oracle database environment.export ORACLE_HOME=/opt/app/oracle/product/11.1.0/db_1export PATH=$ORACLE_HOME/bin:$PATH Installation is complete Congratulations on a successful installation of the Oracle software. This paper hopefully was also successful in its attempt to guide you down a more simplistic path—giving you the commands to execute and working past the minor hurdles encountered during installation. Obviously this paper can not predict all the issues that you may encounter but if you have a relatively current system with ample memory and disk space there is no reason not to believe your installation wouldn't run smoothly.